Water Filtration System
Chemical Free Filtration!
The Flow Guard Iron/Sulfur Filter is a non-chemical solution to remove/reduce Iron/Manganese/ Sulfur (red and black stains or the rotten egg odor from your well water).
How It Works
Water enters the Flow Guard Iron/Sulfur Filter and passes through the air chamber. This begins the oxidation of the iron, manganese or sulfur to a precipitated solid. The multi-media bed then traps the solid and holds it until the next regeneration. When the filter backwashes, the solid is sent to drain.
The Flow Guard Iron/Sulfur Filter uses Automatic, fully programmable Custom Control Valve. The valve is set for two cycles: to backwash the multi-media and to draw air to create the air chamber for the oxidation and precipitation of impurities. The Flow Guard Iron/Sulfur Filter will remove or reduce Iron/Manganese/Sulfur depending on the amount of the impurities in the water. The Flow Guard Iron/Sulfur Filter must regenerate every night in order to maintain a fresh air chamber. Water Guard has a five year warranty on the valve and mineral tank for manufacturer’s defects. The filter media is not under warranty
| SYSTEM CAPACITY AND APPLICATION | ||||||
| 10 X 54 | 12 X 52 | 13 X 54 | 14 X 65 | 16 X 65 | 18 X 65 | |
| Service/Peak Flow | 4 / 6 gpm | 6 / 8 gpm | 7 /9 gpm | 8 /11 gpm | 11 /14 gpm | 13 /18 gpm |